- #Archer c9 upgrade firmware for mac how to
- #Archer c9 upgrade firmware for mac password
- #Archer c9 upgrade firmware for mac series
And they properly see only the 192.168.1.1 gateway, and work perfectly fine. I can connect to the Archer admin console, and everything else too.Īlso, I’m using two of the remaining 3 LAN ports on the back of the Archer for my Yamaha receiver connection, and for one of my NAS connections. With the 1.2 one coming first in the Gateway ordering, it simply does not work! I cannot use my laptop to open the Archer’s admin console at even though I’m connected directly to it! Frustrating.īut if I connect my laptop via one of the Archer’s wifi points (2.4G or 5G), then the “ipoconfig /all” shows only the wanted 1.1 Gateway - and everything works fine. The 1.1 is for my wired router - and it is the ONLY one that I really want. If I plug in my laptop’s ethernet connection to an Archer C3150 LAN port, then run “ipconfig /all” in a command window on my laptop, it shows TWO gateways configured: 192.168.1.2 and 192.168.1.1. After things are rebooted (both the wired and wireless routers), it works. BTW, these same basic instructions for Access Point mode are provided by TP-Link at. There’s surprisingly no real NEED (as on my other routers) to explicitly configure the Gateway or DNS. Well I got it working as an Access Point. Plug the Archer in to your main router, Ethernet-cable-style.
#Archer c9 upgrade firmware for mac password
And change the router login (under Settings > Password and not under Security like you’re very reasonably assuming). Your other router will be on DHCP duty, so the TP-LINK shouldn’t bother.Ĭhange the SSID names and turn on WPA2 security. This can be whatever you want, so long as it doesn’t conflict with anything else on your network. We don’t want them arguing with each other. We need your TP-LINK to have a different IP than your internets-providing router, which may likely also be using 192.168.0.1. Completely ignore the rest of the quick installation guide Toss that thing. The default login is “admin” for both username and password. Log on to that messĬonnect your computer to it with an Ethernet cable, OR hop on one of its default SSIDs it will start broadcasting automagically. You can skip ahead if you’ve already done any/some of these. And you may be dealing with/swearing at messages like “WAN and LAN cannot be on the same subnet”.Īnyway, let’s kick this pig! (Translated: “Let’s do this.”) I’ll just start from the top.
#Archer c9 upgrade firmware for mac how to
While it’s a nice piece of router, the Archer doesn’t make it clear how to do this. Or Their WAN (a.k.a “internet”) port can be used for this job.
#Archer c9 upgrade firmware for mac series
The reason this can be confusing with the Archer series is that many other routers have a setting like “AP mode” that you turn on and you’re done. Like if you have a fiber/DSL/psychic router you can’t replace because ISP reasons but you want some wifi that doesn’t totally suck. The point is you want your TP-LINK to play nice with another router from which your internet actually flows.
0 kommentar(er)
